Product card
Router bits DIA QUATTRO TOP 4
DI082
Application
recommended for processing of panels with veneer and laminate with excellent quality of upper and lower board edges (eg. tabletop)work in high load conditions and with high feed rates, for hard materials processing eg. chipboards, MDF, HDFcutting edge shape guarantees the best results in heterogenous and coated materialsadjusted for mechanical feeddrilling in material and further processing possiblecontour milling Features - benefits
special contruction and position of PCD tips use heterogenous construction (layers) of chipboard what enables perfect processing of both sides of the board with high parameterstwo PCD precutting tips (top/bottom)four full PCD edges (arranged in 4 flutes with two pre-cutting tips)PCD tip height 4,5mmlong router bit life -> enables: 10-12 sharpenings (depending on exploatation and processed material quality)high efficiency -> adjusted to high load and feed rates from 5 up to 18m/minspecial tips position reduces cutting resistancedrilling tip PKD 
Product manager
Łukasz Pow
e-mail: lpow@wapienica.pl
e-mail: lpow@wapienica.pl
Delivery terms
Delivery Costs and Methods
The delivery form and cost are determined individually with customer.
e-mail: eksport@wapienica.pl
Prices do not include the delivery cost (prices quoted EX WORKS).
The delivery form and cost are determined individually with customer.
e-mail: eksport@wapienica.pl
Prices do not include the delivery cost (prices quoted EX WORKS).
Details
| Select | Catalogue | Index | ∅ D [mm] | H1 [mm] | S [mm] | PCD | Z | H PCD [mm] | U.m. |
|---|---|---|---|---|---|---|---|---|---|
| 25 | 22 | 20 | 10 | 4+4 | 4,5 | szt | |||
| 25 | 30 | 20 | 10 | 4+4 | 4,5 | szt | |||
| 25 | 34 | 20 | 13 | 4+4 | 4,5 | szt | |||
| 25 | 39 | 20 | 13 | 4+4 | 4,5 | szt | |||
| 25 | 44 | 20 | 16 | 4+4 | 4,5 | szt | |||
| 25 | 49 | 20 | 16 | 4+4 | 4,5 | szt | |||
| 25 | 55 | 20 | 19 | 4+4 | 4,5 | szt |
Catalogue: - to order
Legend:
edge number = no of PCD lines + drilling tip PCD
Optimal feed rate depends on individual machine working parameters: type of cut material, rotary speed, processing type (hobbing or cutting off)
